− scales BWLC-B1:
− scales BWLC-C-K:
− scales BWLC-C-R:
6. GETTING STARTED
• After unpacking and mounting the scale level it
out. Use levelling legs and the level condition
indicator installed in the basis of the scale.
• Turn the device on using the key – keep pressing the key
for about 0.5 sec,
• Wait for the test completion,
• Then you will see zero indication and pictograms:
- zero indication
- stable result
kg - weight unit
• If the indication is not zero press key.
- 13 -
To Next Page