10. INSCRIPTIONS ON THE DISPLAY
No Text string Description
1 FIL Filter level
2 bAud Transmission baud rate
3 PCS Piece counting
4 HiLo +/- control according to a standard mass
5 rEPL Automatic printout
6 StAb The condition of printing data
7 Auto Autozero correction
8 t1 Power save – time to switch off while no operation
9 toP Latch of the max measurement
10 Add Totalizing
11 AnLS Weighing animals
12 tArE Memory of 9 tare values
13 Indication in autozero zone (indication = exact zero)
14 Stable result (ready to read)
15 PCS Operation mode - counting pieces
16 kg (g) Operation mode - weighing
17 Rechargeable battery pack or battery discharged (BAT-LO)
18 Net Tare function has been used
19 Min
+/- control with reference to the standard mass: setting
the lower threshold or mass below the first threshold
20 OK
+/- control with reference to the standard mass:
load mass between the thresholds
21 Max
+/- control with reference to the standard mass: setting
the upper threshold or mass over the second threshold
22 CALIb The stability test for the internal calibration procedure
23 CAL-H Manual internal calibration
24 CAL-A Automatic internal calibration after powering up
25 CAL-t Internal calibration triggered of by temperature
26 CAL-C Internal calibration triggered of by timer
27 Abort Terminating of internal calibration
- 16 -
To Next Page
Loading...