MRC BWLC-C2-K - Backlight for Supplying from Batteries

Return to weighing:
See 11.2.2.
Notice:
When bl=Auto, and the indication has not changed for 10s,
the backlight is automatically switched off. The backlight is
switched on again automatically after the result changes.
15.1.2. Backlight for supplying from batteries
The user can change the intensity of backlight from 0% to 100%.
The lower the intensity is the longer the scale operates without
recharging or exchanging batteries. When the intensity is set
this function works as AUTO (described above).
Procedure:
• Enter the submenu <P5.othr> and then:
Return to weighing:
See 11.2.2.
Notice:
The more intense the backlight is the shorter the scale operates
on batteries.
- 34 -