MRC BWLC-C2-K - Selecting a Tare Value from the Memory

• The program returns to the following window:
Return to weighing:
•Press .
16.10.2. Selecting a tare value from the memory
• Enter <tArE> function according to the ch. 16.10.1 of the manual,
• The program goes to displaying the first value from the selection
of tare values <tArE 0> (press to chose different values):
• To use an entered tare value press , you will see the tare
value on the display preceded by the „-„ sign and the Net
pictogram:
Caution:
A tare value from the memory is not remembered after powering off
and on the scale.
- 56 -