mrcool.com 10
10
There are 4 types of situations:
1. Clean reminder is o: Timer zone shows "00"
2. Slight Pollution: The rst digit in the timer zone shows 1 while the second shows 0, which indicated the
accumulated operating time is 5500hr. Each time the second digit increases by 1, the accumulated operating
time increases by 500hr. When it reaches 9, it means the accumulated operating time is 10,000hr.
3. Medium Pollution: The rst digit in the timer zone shows 2 while the second shows 0, which indicates the
accumulated operating time is 1400hr. Each time the second digit increases by 1, the accumulated operating
time increases by 400hr. When it reaches 9, it means the accumulated operating time is 5000hr.
4. Heavy Pollution: The rst digit in the timer zone shows 3 while the second shows 0, which indicates the
accumulated operating time is 100hr. Each time the second digit increases by 1, the accumulated operating
time increases 100hr. When it reaches 9, it means the accumulated operating time is 1000hr.
Pollution Level
Accumulative
Operating Time
(Hour)
10 5500
11 6000
12 6500
13 7000
14 7500
15 8000
16 8500
17 9000
18 9500
19 10000
Pollution Level
Accumulative
Operating Time
(Hour)
20 1400
21 1800
22 2200
23 2600
24 3000
25 3400
26 3800
27 4200
28 4600
29 5000
Pollution Level
Accumulative
Operating Time
(Hour)
30 100
31 200
32 300
33 400
34 500
35 600
36 700
37 800
38 900
39 1000
If the lter clean function is turned on, the CLEAN icon will be on.
1. If cleaning time is not reached, whether the setting is changed or not, the accumulated operating time won't
be recalculated when pressing the Swing/Enter button.
2. If cleaning time is reached, when the unit is on or o, the CLEAN icon will blink every 0.5s as a reminder.
Press the Function button to select the CLEAN icon and press the up or down arrow button to adjust the
level. Then, press the Swing/Enter button so the accumulated operating time won't be cleared. (If the
adjusted level is higher than the present accumulated operating time, the icon won't blink anymore; if the
adjusted level is lower than the present accumulated operating time, the icon will continue blinking.)
3. To cancel the lter clean reminder function, press the Function button to select the clean reminder function.
The CLEAN icon will blink. Press the up or down arrow buttons to adjust the timer zone to display "00". The
accumulated operating time will be cleared.
WIRED CONTROLLER
2
To Next Page
Loading...
Need help?
General
