MSA ProtoCessor FPC-ED2 - Additional Information; Enclosure - Mechanical Design

29 pages

Save Page as PDF

To Next Page

To Previous Page

9 Additional Information

9.1 Enclosure – Mechanical Design

NOTE:The height of 0.312” is only applicable when using the spacer as per Section 8.4 Mechanics – Standoff.

25 ProtoCessor Design Guide

Main Page

Table of Contents3
About the Protocessor5
Certification5
Protocessor Family of Modules6
Protocessor (FPC-ED2)6
Protocessor (FPC-ED4)6
Protocessor (FPC-E03)6
Protocessor (FPC-AD2)6
Implement the Protocessor from a Hardware Perspective7
How to Implement the Protocessor Socket on OEM Hardware7
Protocessor Socket PCB Footprint - Layout8
Pin Assignment8
Protocessor TTL Socket for 2X10 Header Pins8
Protocessor Pin Voltage Levels9
Protocessor Pin Headers9
Location of Pins on the Protocessor10
Fpc-Ad210
Fpc-Ed210
Fpc-E0310
Fpc-Ed410
Standoff Dimensions11
Protocessor Power Requirements12
Implement the Protocessor from a Software Perspective13
Protocessor Supported Host & Field Protocol Communications13
Protocessor Device/Field Supported Protocols14
How Protocessor Works15
Introduction15
Full Function Protocessor15
Configuration File16
Application Specific Protocessor (ASP)17
How to Implement and Test any ASP Protocessor18
Protocessor Simple Protocol (PSP) Specification19
Purpose of the Protocol19
Protocol Description19
Quick Start - Demonstrates the Simplicity of the Application19
Serial Parameters19
Message Structure20
Binary Packed Messages20
Payload Contents20
Writing to Output Data Objects22
Error Conditions22
Format of the Error Response22
Error Response Table22
Using Change of Value Reads23
Recommended Connectors, Cables and Mechanics24
Protocessor Pin Headers24
Expansion Connector for ASP - FPC-AD4 and FPC-AD524
Expansion Cable for ASP - FPC-AD4 and FPC-AD524
Mechanics - Standoff24
Additional Information25
Enclosure - Mechanical Design25
Mechanical Drawings - Protocessor26
Mechanical Dimension Drawing FPC-E0326
Mechanical Dimension Drawing FPC-ED226
Mechanical Dimension Drawing FPC-ED427
Mechanical Dimension Drawing FPC-AD227
Specifications28
Warnings28
Limited 2 Year Warranty29

MSA ProtoCessor FPC-ED2 - Additional Information; Enclosure - Mechanical Design

Table of Contents