MSA S5000 User Manual

2. Select Instrument.
3. Select to enter the menu.
Table 11 Default Device Settings
Setting Menu 1 Default Range of options
Sensor Setup Sensor1/Sensor2
Disable Enabled Enable/Disable
Gas Label and Unit see Table 12 see Table 12
Range see Table 12 see Table 12
Cal Level see Table 12 see Table 12
Warning Level see Table 12 see Table 12
Alarm Level see Table 12 see Table 12
Alarm Action see Table 12 see Table 12
Sensor Reset No Yes/No
Relay Settings Relay Zone/Mapping Common Common/Discrete
Relay1/Relay 2
Energized/De-energized
De-energized Relay1/Relay2
Energized/De-energized
HART Enabled/Disabled Enabled Enable/Disable
HART AO Analog Output Enabled 1.25 or 3.5
Cal Alert Enable/Disable Enabled Enable/Disable
Bluetooth
®
Enable/Disable Enabled Enable/Disable
Modbus Baud Rate 19200 2400-115200BPS
Format 8-n-1
Address 1 1-247
EZ Touch Enable/Disable Enabled
Swap Delay Enabled Enabled Enable/Disable
UI Password Enabled/Disabled
New Password
Disabled
No
Enable/Disable
Yes/No
Transmitter Reset No No Yes/No
36
4 Operation US

MSA S5000 Specifications

General

Brand	MSA
Model	S5000
Category	Monitor
Language	English