7 Ordering Information
7.1 Replacement Parts
See Table 18 for replacement sensor kits. To obtain a replacement sensor, address the order or inquiry to:
General Monitors
26776 Simpatica Circle
Lake Forest, CA 92630
or call, toll-free, 1-800-446-4872.
Inquiries can also be e-mailed to info.gm@msasafety.com.
WARNING!
Use only genuine MSA replacement parts when performing any maintenance procedures provided in this manual. Failure to do
so may seriously impair sensor and gas monitoring performance, alter flameproof/explosionproof characteristics or void
agency approvals. Failure to follow this warning could cause the product to fail to perform as designed and persons who rely on
this product for their safety could sustain serious personal injury or loss of life.
Repair or alteration of the S5000 Gas Monitor, beyond the scope of the maintenance procedures provided in this manual or by
anyone other than authorized MSA service personnel, could cause the product to fail to perform as designed and persons who
rely on this product for their safety could sustain serious personal injury or loss of life.
Failure to follow these warnings can result in serious personal injury or death.
Table 18 Replacement Parts
Type Description P/N
PCBA Assemblies S5000-PCB
Sensor Body, XCell A-5K-SENS
Sensors, XCell A-5K-SENS
Sensor Guard, XCell Sensor Guard Assembly, S5000 10177624
Sensor Guard, IR400 Sensor Guard, IR400, with Screen 32545-1
Sensors, Passive
CB 0-100% LEL (C04 – Screened, DivApprovals)
CB 0-20% LEL (C10 – Sintered, ZoneApprovals)
CB 0-100% LEL (C11 – Sintered, ZoneApprovals)
10058-1
11159-8
11159-1
MOS 0-100ppm (M04 – Screened, DivApprovals)
MOS 0-100ppm (M14 – Sintered, ZoneApprovals)
50448-1
51457-1
MOS 0-50ppm (M05 – Screened, DivApprovals)
MOS 0-50ppm (M15 – Sintered, ZoneApprovals)
50448-5
51457-5
MOS 0-20ppm (M06 – Screened, DivApprovals)
MOS 0-20ppm (M16 – Sintered, ZoneApprovals)
50448-9
51457-9
82
7 Ordering Information US
To Next Page
Loading...
Need help?
General
