AWARD
®
BIOS Setup
3-15
AGP without any translation. Options are 4M, 8M, 16M, 32M, 64M, 128M
and 256M.
AGP-4X Mode
The item enables or disables the support for AGP 4X mode. Select Enabled
if your AGP card supports AGP 4X.
AGP Driving Control
This filed is used to adjust the AGP driving force. Selecting Manual allows
you to type an AGP driving force in AGP Driving Value. It is strongly
suggested to select Auto to avoid causing any system error.
AGP Driving Value
The item specifies the AGP driving force.
AGP Fast Write
The item enables or disables the AGP Fast Write feature. The Fast Write
technology allows CPU to write directly into the graphics controller without
passing anything through system memory and improves 4X speed
accordingly. Select Enabled only when your card supports the feature.
OnChip USB
The item is used to enable or disable the USB ports. Settings are Enabled
and Disabled. The default is Enabled.
USB Keyboard/Mouse Support
Set to Enabled if your need to use an USB keyboard/mouse in the operating
system that does not support or have any USB driver installed, such as DOS
and SCO Unix. Default is Disabled.
OnChip Sound
Auto allows the mainboard to detect whether an audio card is used. If an
audio card is detected, the onboard AC97 audio controller will be enabled; if
not, the controller is disabled. Settings are Auto (default) and Disabled.
OnChip Modem
Auto allows the mainboard to detect whether a modem is used. If a modem is
To Next Page
Loading...
