Chapter 5
5-6
screen will appear again.
3. Click on VIA AC97 PCI Sound Drivers and the screen will show VIA
AC97 PCI Sound Drivers.
4. Click Next to proceed and the screen will show Install or Uninstall.
Select Install and then click on Next.
5. A window Digital Signature Not Found will appear and ask “Do you
want to continue the installation of the VIA AC’97 Audio Controller
(WDM) Driver?” Click Yes to proceed.
6. Click Finish to complete setup.
Installing Creative CT5880 Sound Driver (Optional)
1. Make sure the supplied CD disk is in the CD-ROM drive.
2. Go to My Computer and double click the CD-ROM icon. The setup
screen will appear again.
3. Click on Creative PCI 128 Sound Drivers.
4. The setup program will request you to Remove and Install Software
or Remove Only. Select Remove and Install Software and click Next
to continue.
5. A window Digital Signature Not Found will appear and ask “Do you
want to continue the installation of Creative Sound Blaster PCI128
(WDM)?” Click Ye s .
6. Click Finish to complete installation.
One Touch Setup:
In Windows
®
2000, you probably will see the One Touch Setup
button appear on the setup screen. Choosing the button will help
you install more than one driver into the system without going
through the installation process step by step and save a lot of time.
After clicking on One Touch Setup, a window will show up listing
what drivers will be installed. Install other drivers not included by
One Touch Setup manually if any.
To Next Page
Loading...
