Installing VIA Chipset Drivers
5-7
Driver Installation for Windows
®
ME
Installing VIA® Chipset Driver
1. Insert the supplied CD disk into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Click on Via Chipset Drivers and the screen will show VIA Service
Pack 4.XX.
4. Click Next and the screen will show a VIA Service Pack 1 README
dialog box.
5. Click Ye s and the screen will show two drivers: AGP VxD Driver and
VIA INF Driver 1.XX. Select all and click Next to proceed.
6. The screen will show a VIA_GART AGP Driver 4.XX dialog box.
Select Install VIA AGP VxD in Turbo mode and click Next.
7. The setup program will request you to choose whether to restart the
computer or not. Please select “Yes, I want to restart my computer
now” and click Finish. The computer will restart and finish the VIA
Chipset Drivers installation.
Installing VIA® AC97 PCI Sound Driver
1. Make sure the supplied CD disk is in the CD-ROM drive.
2. Go to My Computer and double click the CD-ROM icon. The setup
screen will appear again.
3. Click on VIA AC97 PCI Sound Drivers.
4. Then restart the system manually to make it work.
Installing Creative CT5880 Sound Driver (Optional)
1. Make sure the supplied CD disk is in the CD-ROM drive.
2. Go to My Computer and double click on the CD-ROM icon. The
setup screen will appear again.
3. Click on Creative PCI 128 Sound Drivers.
4. The setup program will request you to Remove and Install Software
or Remove Only. Select Remove and Install Software and click Next
to continue.
5. Click Finish and then click Ye s to restart your computer and complete
the installation.
To Next Page
Loading...
