13
3. After connecting MEGA STICK 511 to computer, go to [Device Manager]
and find a new drive named [Player Recovery Device Class] to check
connection status. If the connection is failed, you will not find [Player
Recovery Device Class] appearing in [Device Manager]. At this time,
repeat step 1 and 2 to try to connect MEGA STICK 511 to your computer.
4. Now, release Play/Pause Button.
5. Click [Start -> Programs -> MSI -> MS-5511 -> Update] to load firmware.
6. After loading firmware, you can see an update dialog.
To Next Page
Loading...
