26
Record Function
MEGA STICK 511 can be used to record voice, an interview or a speech, and
external audio signal by the Line-in Jack.
Note: The maximum length of the recording depends on how much available
memory space is left while recording.
Note: The maximum amount of files stored in MUSIC, VOICE, and LINEIN
category is 650.
Activate Voice Recording Function
1. Press down Menu button once, and then push Menu button to the right
until SETTINGS appears on the display. Press Menu button to enter.
2. Push Menu button right or left until RECORD SOURCE message
appears on display. Press down Menu button once to enter the sub-menu.
3. Switch Menu button to the right or to the left to choose Microphone.
Press Menu button again to confirm. Exit RECORD SOURCE menu by
pressing Menu button for 1 second.
4. Press REC [y] button next to Fn button to start voice recording.
5. A recording file should be generated and placed under the folder of
[/VOICE/]. The recording file name starts from [V001.WAV], and then
[V002.WAV], and so forth.
6. To stop recording, simply press down REC button again, and you will see
the status return to previous.
To Next Page
Loading...
