48
Upgrade Software
MEGA VIEW 588 software can be upgraded. Software version update might
include interfaces modification and function update. You need a computer and
the supplied USB cable for the following procedures:
Note: To prevent battery runs out while upgrading resulting system failure, we
recommend to plug the AC Adaptor to provide electricity.
Note: If you need to update both firmware and software, update firmware first.
1. Connect MEGA VIEW 588 to your computer with the USB cable.
2. Power on MEGA VIEW 588 to initialize it on your computer.
3. Download a MEGA VIEW 588 upgrade file from internet and save it into
MEGA VIEW 588 root directory. Double click to run the upgrade file, and
select “Replace all” on pop-up message to replace old files.
4. Safely remove MEGA VIEW 588 from your computer.
5. Select Setting from main menu and press down Navigation key to enter.
6. Push Navigation key left or right to select Info tab.
7. Push Navigation key up or down to select Update Software.
8. Push Navigation key to the right. Message "Update Software? Yes No"
will show on the display.
9. Push Navigation key right or left to select Yes and press down Navigation
key to start to upgrade software. Or select No and enter to cancel upgrade.
10. When software upgrade completes, system will restart.
To Next Page
Loading...
Need help?
General