B-7
Overclocking Center
In each setting menu, you can select desired values for manual overclocking. Simply
click the right side of the button which arranges an arrow sign, and a drop-down
menu will appear below the button, then select a value.
Click the arrow sign and
the drop-down menu
will appear.
In the “System Warning” block, you can set the maximum CPU/ system temperature
and the minimum CPU/ system fan speed by using the scroll bar. The system will pop-
up a warning message to warning you when the temperature/ fan speed is over/
lower the values you set.
Set the thresholds of
CPU temperture & CPU
FAN speed.
To Next Page
Loading...
Need help?
General
