MSI MS-7520 ECLIPSE Series User Manual

3-19
BIOS Setup
BIOS Setting Password
When you select this function, a message as below will appear on the screen:
Type the password, up to six characters in length, and press <Enter>. The password
typed now will replace any previously set password from CMOS memory. You will
be prompted to confirm the password. Retype the password and press <Enter>. You
may also press <Esc> to abort the selection and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the
password. A message will show up confirming the password will be disabled. Once
the password is disabled, the system will boot and you can enter Setup without
entering any password.
When a password has been set, the “Password Check” item will be appear in
Advanced BIOS Features menu. Setting [BIOS] in “Password Check” item, and you
will be prompted to enter it every time you try to enter Setup. Setting [System] in
“Password Check” item, and you will be prompted to enter it every time you try to
enter System and Setup.This prevents an unauthorized person from changing any
part of your system configuration.

MSI MS-7520 ECLIPSE Series Specifications

General

Brand	MSI
Model	MS-7520 ECLIPSE Series
Category	Motherboard
Language	English