MS-7520 Mainboard
D-14
Create RAID
JMRaidTool supports the creation of RAID 0, 1 and JBOD.
1. Left-click the “Create Raid” button.
2. A CREATE RAID WIZARD dialogue will display on the screen, following the descrip-
tion of every step to complete the creation.
Create RAID from Existing Disk
You can combine the Existing Disk (Source disk may content OS and Data) with other
HD (must be larger than source Disk) to be RAID. The data on Source Disk will be
reserved. After RAID is built, system will need to reboot.
1. Left-Click the “Create RAID from Existing Disk” icon on the toolbar.
2. A “CREATING RAID FROM EXISTING DISK” wizard dialogue will display on the
screen, following the description of every step to complete the creation.
To Next Page
Loading...
