3-12
MS-7520 Mainboard
Drive Booster Controller #1 (for SATA7 & 8)/ #2(for SATA9 & 10)
Press <Enter> to enter the sub-menu, and the following screen appears.
Current Mode
This item shows the current SATA mode. Read only.
Drive Booster Mode Update:
Update To RAID0 (Stripe)/ RAID1(Mirror)/ JBOD(Large)/ Normal Hdd
These items are used to enable the RAID0/ RAID1/ JBOD/ Normal (non-RAID)
mode for the SATA devices.
On-Chip ATA Devices (for ICH10R)
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
On-Chip SATA Controller
These items allow users to enable or disable the SATA controller.
RAID Mode
This item allows you to configure SATA mode. Setting options: [RAID], [AHCI] or
[IDE].
AHCI Configuration
When the “RAID Mode” sets to [AHCI], this field is available. Press <Enter> to
enter the sub-menu and the following screen appears:
To Next Page
Loading...
