MST Impact NS5001 User Guide

If the Access Point is sending tag reports to an MST Tracker Engine, the Tracker Engine's IP address
must be entered into each Access Point.
There are four sections on the Tracking conguration screen:
Enable
Check Enable Wi-Fi Tracking to view other settings.
RSSI Lower Thresholds
These settings are used to control what location reports are sent to the Positioning Engine. If a Wi-Fi tag
or mobile unit report is received with an RSSI below the relevant threshold, it is not sent to the Positioning
Engine (whether it is an AeroScout Positioning Engine or MST Tracker Engine). The default threshold
is -95 dBm, but this can be raised or lowered according to specic site conditions and requirements.
NS50 User Guide77Revision C
Conguration Using the Web Interface

MST Impact NS5001 Specifications

General

Brand	MST
Model	Impact NS5001
Category	Switch
Language	English