MST Impact NS5001 User Guide

Recommended SettingsDescriptionField
Default is DHCP. If Static IP is
selected, the following elds must be
lled in.
DHCP (Dynamic) or Static IP (Manual)Get LAN IP from
A different IP address is required for each
WAC in a network.
The IP address of the WAC.IP Address
The default subnet mask is 255.255.255.0.Identies the subnet the IP address
belongs to for the WAC.
Subnet Mask
Settings are dependent on the site's
network design.
The IP address of the default gateway
to be used by the WAC.
Gateway
Settings are dependent on the site's DNS
design.
The DNS server used by the WAC
when looking up host names.
Primary DNS
Settings are dependent on the site's DNS
design.
The backup DNS server used by the
WAC when looking up host names.
Secondary DNS
Leave the eld blank if you do not wish
to add a domain name.
Local domain name for the network.Local Domain
Name
If the device is left on DHCP, only the following elds are shown. These values will function as above,
only if they are not dened by the DHCP server.
5.5.4 Configuring Wireless Radio
The Wireless Radio conguration screen congures wireless radio settings.
Revision C68NS50 User Guide
Conguration Using the Web Interface

MST Impact NS5001 Specifications

General

Brand	MST
Model	Impact NS5001
Category	Switch
Language	English