LUBRICATION
40
NOTE: The PCV valve is not serviceable. If it is
faulty, the valve cover must be replaced.
4. Reassemble the PCV and valve cover by follow-
ing the above steps in reverse order..
NOTE: Tighten the cover bolts to a torque of 62
- 79.7 in-lbs. (7-9 Nm).
5. Inspect the PCV tubing for cracks, brittleness or
signs of leaking. Replace the PCV tube if any
are found.
6. Test run the engine before returning to service.
To Next Page
Loading...
Need help?
General
