MTHTrains DCS - DCS System Setup Overview

SPD
Pressing the SPD softkey enables the
display to show up to 128 speed steps
(0-127).
MOM
Pressing the MOM softkey allows you
to set the Momentum of an individual
engine or a lash-up
REL
Pressing the REL softkey enables
Relative speed stepping. This is
particularly useful when operating items
such as Crane Cars that have 360
degree movement. Rolling up on the
thumbwheel is the same as spinning the
knob clockwise on the CAB-1/CAB-2
remote, while rolling down on the DCS
thumbwheel is the same as spinning the
knob on the CAB-1/CAB-2 remote
counterclockwise
15
TMCC Engine Control cont.