Auto Coupler
You can now elect to have the
coupler slack sounds play
automatically every time an engine
pulls away from a stop, or only when
you press the SCS soft key.
1. Press MENU
2.Select SOUND
3. Scroll to AUTO COUPLER and
press Select
4. Select either OFF or AUTO.
AUTO will enable the feature for
ALL engines in the remote
5. Press the ENG button and select a
DCS engine
6. Ensure the engine has been start-
up.
7. Scroll the thumbwheel up to get
the engine moving and as soon as it
pulls away it will play the Coupler
Slack sound
8. Once the engine goes back to
0sMPH then pulls away at any speed
the sound will play again. It will work
this way on every DCS engine in your
remote until you shut it off.
9. To turn the feature Off, repeat
steps 1-3 and press the OFF softkey
3
New Engine Control Options
NOTE - This setting is a
global setting, so when
you make this setting it
will affect all engines in
the DCS Remote
To Next Page
Loading...
