If ‘HOST->LPM” is selected, the following screen is displayed, where PAGE X refers to the memory
page (0-3) chosen above.
After the host has initiated the transfer, the following screen is displayed.
The transfer operation can be aborted at any time by pressing the ‘Clear’ key. The following
screen is displayed.
If the transfer operation is successful, the following screen is displayed.
LPM MEMORY TRANSFER
HOST->LPM (PAGE X)
TRANSFER COMPLETE
‘Clear’ TO EXIT
LPM MEMORY TRANSFER
HOST->LPM (PAGE X)
TRANSFER ABORTED
‘Clear’ TO EXIT
LPM MEMORY TRANSFER
HOST->LPM (PAGE X)
TRANSFER IN PROGRESS
‘Clear’ TO EXIT
LPM MEMORY TRANSFER
HOST->LPM (PAGE X)
WAITING FOR HOST
‘Clear’ TO EXIT
74
To Next Page
Loading...
Need help?
General