7.10.2 Air filter – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Air filter – Removal and installation
1. Release clamp (2).
2. Remove air filter (3) and clamp (2) from
flange of intake housing (1).
3. Verify that there are no objects in the flange
of the intake housing (1) and clean it.
4. Place new air filter (3) with clamp (2) onto
intake housing (1).
5. Tighten clamp (2).
MW15407/14E 2012-02 | Task Description | 113
TIM-ID: 0000005457 - 005
To Next Page
Loading...
