4.2 Putting the engine into operation (out-of-service-period > 3
months)
Preconditions
☑ Engine is stopped and starting disabled.
☑ MTU Fluids and Lubricants Specification (A001061/..) is available.
Putting the engine into operation ( > 3 months)
Item Task
Engine Depreserve (→ MTU Fluids and Lubricants Specification A001061/..).
Universal shaft Grease (→ Page 144).
Lube oil system Check oil level (→ Page 119).
Fuel prefilter Prime (→ Page 110).
Fuel prefilter, pressure
gauge
Align adjustable pointer with position of pressure indicator (→ Page 106).
Fuel system Vent (→ Page 102).
Raw-water pump (if located
above waterline)
Prime (approx. 3 to 4 liters).
Cooling system If engine is out of service for more than one year, change coolant
(→ Page 133).
Cooling system Check coolant level (→ Page 132).
Cooling system Preheat coolant with preheating unit.
ECU Check plug-in connections (→ Page 149).
Engine control system Switch ON.
Press READY FOR OPERATION button (→ Page 50).
LOP Press LAMP TEST button (→ Page 50).
52 | Operation | MW15407/14E 2012-02
TIM-ID: 0000002215 - 002