4.9 Clutch – Disengaging from LOP
Preconditions
☑ LOCAL OPERATION button is illuminated brightly (local operating mode is active).
☑ Engine speed in disengagement window.
Disengaging clutch without reversing gearbox (CPP, WJ, VS)
Item Action
LOP Press CLUTCH OUT button (→ Page 50).
• CLUTCH OUT button flashes.
• Clutch is disengaged.
• After receiving the feedback signal from clutch, the CLUTCH OUT but‐
ton is illuminated brightly.
Disengaging clutch with reversing gearbox (FPP, WJ)
Item Action
LOP Press CLUTCH NEUTRAL button (→ Page 50).
• CLUTCH NEUTRAL button flashes.
• Gearbox is disengaged (neutral position).
• After receiving the feedback signal from clutch, the CLUTCH NEUTRAL
button is illuminated brightly.
MW15407/14E 2012-02 | Operation | 59
TIM-ID: 0000002810 - 003
To Next Page
Loading...
