MTU 8 V 2000 M70 - Page 162

Double-head box wrench
Part No.: F30011450
Qty.:
Used in:
1
7.6.2 Injector – Removal and installation (→ Page 94)
Qty.:
Used in:
1
7.7.1 HP fuel line – Pressure pipe neck replacement (→ Page 98)
Feeler gauge
Part No.: Y4342013
Qty.:
Used in:
1
7.4.1 Valve clearance – Check and adjustment (→ Page 85)
Qty.:
Used in:
1
7.20.1 Engine mounting – Checking condition of resilient mounts (→ Page 142)
Fuel suction device
Part No.: F30378207
Qty.:
Used in:
1
7.6.2 Injector – Removal and installation (→ Page 94)
Mandrel
Part No.: 8205892861/08
Qty.:
Used in:
1
7.19.2 Battery-charging generator drive – Drive belt replacement (→ Page 141)
MTU test kit
Part No.: 5605892099/00
Qty.:
Used in:
1
7.16.7 Engine coolant – Sample extraction and analysis (→ Page 136)
Oil filter wrench
Part No.: F30379104
Qty.:
Used in:
1
7.8.1 Fuel filter – Replacement (→ Page 103)
Qty.:
Used in:
1
7.15.2 Engine oil filter – Replacement (→ Page 121)
Open end socket wrench
Part No.: F30025897
Qty.:
Used in:
1
7.6.2 Injector – Removal and installation (→ Page 94)
Qty.:
Used in:
1
7.7.1 HP fuel line – Pressure pipe neck replacement (→ Page 98)
Puller
Part No.: 3555890163/00
Qty.:
Used in: 7.6.2 Injector – Removal and installation (→ Page 94)
162 | Appendix B | MW15407/14E 2012-02
DCL-ID: 0000015775 - 001