MD-1000I / MD-2000I / MD-3000I Introduction
– Incompatibility of product due to technical changes or regulations that oc-
cur after purchase.
– Incompatibility or malfunction caused by product components not installed
by multimatic Vertriebs GmbH.
– Effects caused by normal product wear and tear.
– Defects caused by external apparatuses or devices.
Warranty periods for parts repaired or replaced under the unit's original war-
ranty expire when the unit's warranty expires.
Units returned without accessories will be replaced without accessories. To be
accepted, products returned must be shipped in their original packages.
In general, the warranty does not cover shipping costs.
The customer is responsible for repair and replacement costs and multimatic
Vertriebs GmbH is not liable for damages, whether direct, accidental, unique or
consequential damage, even if caused by negligence or other acts.
multimatic Vertriebs GmbH gives neither explicit nor implicit guarantees on
this product, its quality, performance, saleability or suitability for a specific pur-
pose. In some countries, the exclusion of implicit guarantees is not permitted
by law. In such instances, the validity of all express and implicit guarantees is
limited to the warranty period. When the warranty expires, all guarantees lose
their validity. In some countries, law does not permit a limit of the period of va-
lidity of implicit guarantees, so that the limitation described above does not take
effect.
MD Series 12
To Next Page
Loading...
