MD-1000I / MD-2000I / MD-3000I Safety Instructions
2. Safety Instructions
2.1 Introduction
The UPS is designed and built in accordance with technical guidelines
and regulations for uninterruptible power supply equipment. It and its
components, modules and assemblies individually and as an entire sys-
tem meet the current safety code requirements and comply with the EU
2006/42/EG Machinery Directive.
The UPS is operationally safe, provided the user uses this appliance pur-
suant to said codes and regulations and the safety instructions, guide-
lines and precautions stated in this user manual.
2.2 Compliant Use
Use the UPS and its components solely for their intended purpose, which
is the temporary supply of electrical power to electrical devices (230 V
AC) while, together, not exceeding the total nominal capacity.
Any other use or use that exceeds said use is not in accordance with the
intended purpose and may lead to personal injury or equipment damage!
Improper uses
The UPS is not intended for use:
– in explosive,
– dust-laden,
– radioactively or
– biologically or chemically contaminated atmospheres.
The
UPS is Class A equipment. This product may produce electromag-
netic interference. If this is the case in living areas, the user may be re-
quired to implement appropriate corrective measures.
MD Series 16
To Next Page
Loading...
