MD-1000I / MD-2000I / MD-3000I Explanation of USB Function
6. Syn-Frequency Window: Select 3Hz/1Hz inverter frequency
range
7. Com. port: Select the PC’s communication port
8. Click Write to confirm the configuration settings. The UPS sounds two audi-
ble tones to indicate you have successfully made the settings.
9. After you have completed the configuration, shut the UPS down to make
sure the system saves all the settings in the EEPROM. To activate the new
setting, restart the UPS.
NOTE: *
CF50/CF60 = Frequency inverter mode 50 to 60Hz or vice versa.
MD Series 47
To Next Page
Loading...
