For factory assistance, call
888-436-5442
Fax 888-779-2040
Page 8
Size and Option Touch Screen
3. Select drink options:
- Select Return to view the previous screen.
- The yogurt button toggles between including and
leaving out the yogurt.
- Select the Multiple button if you want to make
multiple drinks of the same avor.
- Select drink size(s).
NOTE: A green box will highlight the
selections.
4. The machine will add the proper amount of
ingredients, blend and stop automatically.
5. Pour the drink into a properly sized cup for the drink
selection.
6. Place container in rinse position – container is
automatically rinsed.
Procedure to Clear Blocked Line
These instructions can be found on the Touch Screen in
the Help Menu under “Clear Pump Clog”.
Fill a squirt bottle with very warm potable water.
Remove product holder.
Connect squirt bottle with vinyl tubing to product
tube inlet.
Place a pitcher on the container pad.
Navigate touch screen to prime function and select
line that is clogged.
Press Prime button and hold while squeezing the
squirt bottle. Watch for product to enter the pitcher.
Repeat Step 6 until valve clears and product enters
pitcher.
Disconnect squirt bottle with vinyl tubing. Insert
product container back into unit.
Press Prime until only product ows into pitcher.
Press the “Return” button when completed.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Operation, continued
To Next Page
Loading...
General