ANTENNA AND ACTIVATION INFORMATION
MultiConnect
®
Cell MTC-MNG6 User Guide 15
Chapter 3 – Antenna and Activation Information
Notice regarding Compliance with FCC, EU, and Industry Canada
Requirements for RF Exposure
The antenna intended for use with this unit meets the requirements for mobile operating configurations and for
fixed mounted operations, as defined in 2.1091 of the FCC rules for satisfying RF exposure compliance. This device
also meets the European RF exposure requirements of EN 62311. If an alternate antenna is used, consult user
documentation for required antenna specifications.
Compliance of the device with the FCC, EU and IC rules regarding RF Exposure was established and is given with
the maximum antenna gain as specified above for a minimum distance of 20 cm between the devices radiating
structures (the antenna) and the body of users. Qualification for distances closer than 20 cm (portable operation)
would require re-certification.
Wireless devices could generate radiation. Other nearby electronic devices, like microwave ovens, may also
generate additional radiation to the user causing a higher level of RF exposure.
Cellular Antenna
Cellular devices were approved with the following antenna:
Manufacturer: Wieson
Model Number: ARY118-0167-001-00
MultiTech ordering information:
Model Quantity
ANLTE4V2-1HRA 1
ANLTE4V2-2HRA 2
ANLTE4V2-10HRA 10
ANLTE4V2-50HRA 50
Cellular Antenna Specifications
Category Description
Frequency Range 617-960 MHz
1447-2690 MHz
3300-3800 MHz
Impedance 50 Ohms
VSWR 619-960 MHz: 2.5:1
1447-2690 MHz: 2:1
3300-3800 MHz: 2:1
To Next Page
Loading...
