REGULATORY INFORMATION
MultiConnect
®
Cell MTC-MNG6 User Guide 35
FCC Rule Part Frequency Range
(MHz)
Power Output
(mW)
Frequency Tolerance
(PPM)
Emission
Designator
27 699.1 - 715.9 0.23 2.5 PM 184KG7D
27 699.7 - 715.3 0.22 2.5 PM 1M10G7D
27 699.7 - 715.3 0.2 2.5 PM 938KW7D
27 777.1 - 786.9 0.19 2.5 PM 129KG7D
27 777.1 - 786.9 0.23 2.5 PM 184KG7D
27 779.5 - 784.5 0.2 2.5 PM 1M10G7D
27 779.5 - 784.5 0.2 2.5 PM 939KW7D
90 814.1 - 823.9 0.2 2.5 PM 127KG7D
90 814.1 - 823.9 0.21 2.5 PM 190KG7D
90 814.7 - 823.3 0.22 2.5 PM 1M10G7D
90 814.7 - 823.3 0.21 2.5 PM 925KW7D
Output power is conducted.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators.
This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter
evaluation procedures as documented in this filing. End-users may not be provided with the module installation
instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying
RF exposure compliance.
The highest antenna gain including cable loss, must not exceed 8.0 dBi for Band 2 and Band 25, 5.0 dBi for Band 4
and Band 66, 9.4 dBi for Band 5, 8.7 dBi for Band 12, 9.1 dBi for Band 13, 9.3 dBi for Band 26, 6.9 dBi for
GPRS/EDGE 824-849MHz Band, 2.5 dBi for GPRS/EDGE 1850-1910MHz Band . This device contains functions that
are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
To Next Page
Loading...
