Chapter 3 - Using the Front Panel
28
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide
Caller ID Options
Press the à and Enter buttons to enable formatted (FCID) or unformatted (UCID)
Caller ID, or to disable Caller ID altogether. Same as the
#CID=0
,
#CID=1
, and
#CID=2
commands.
Note: Because Caller ID information is sent between the first and second ring, regis-
ter
S0
must be set to 2 or more rings for the modem to receive Caller ID information.
To Next Page
Loading...
