Appendix B - Technical Specifications
52
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide
Frequency Stability
±0.01%
Receiver Sensitivity
-43 dBm under worst-case conditions
AGC Dynamic Range
43 dB
Interface
TIA/EIA RS-232C/ITU-T V.24/V.28
Connectors
DB25F RS-232C connector; two RJ-11 phone jacks (BA
model) or three RJ-11 phone jacks (BL model); power
connector
Cables
Three modular telephone cords (USA); country-specific
cordage for International models; one 9-pin to 25-pin serial
cable for International models; external power transformer
Note: Any cables connected to the computer should be
shielded to reduce interference.
Diagnostics
Power-on self test, local analog loop, local digital loop,
remote digital loop
Indicators
32-character backlit LCD for status and configuration
information; LEDs for Transmit Data, Receive Data,
Carrier Detect, Off Hook, Terminal Ready, and Test Mode
Speaker
1-inch speaker for call progress monitoring
Manual Controls
Power switch, speaker volume control, four LCD control
buttons
Environmental
Temperature range 0°–50°C (32°–120°F) ambient under
closed conditions; humidity range 20–90% (non-condensing)
Storage Temperature
-10° to +85°C (14°–185°F)
Power Requirement
120 VAC, 60 Hz, 16 W; 230V/50 Hz optional (international)
Power Consumption
12 W @ 0.1 A typical
Dimensions
15.8 cm wide × 22.9 cm long × 3.6 cm high (6.2
"
× 9.0
"
× 1.4
"
)
Weight
0.9 kg (2 lb.)
Limited Warranty
10 years
To Next Page
Loading...
