Munters MCS300 - Start Procedure

MCS300
4.3Start
4.3.1Measuredvalues
Man
Auto 1
Auto 2
KWH
Temp
C
D
Figure4.2Controlpanel
C.Measurementselector
D.Operatingmodeselector
Thefollowingparameterinformationisdisplayedonthecontrolpanel:
Totaloperatingtime
KWH
Powerconsumptionduringaspecicperiod
Temp
Reactivationtemperature
Changetheparameterdisplaybypressingthemeasurementselectorbuttononthecontrolpanel.
Measurementofpowerconsumptioncanberesetbeforeeachdehumidifyingoccasionorperiodofuse.
Toresetthemeasurement:
1.Switchofftheunit
2.PressboththeMeasurementandOperatingModeSelectorsatthesametimeandthenswitchtheunit
On(positionI)whilestillpressingtheselectors.Keeptheselectorspressedforatleast5secondsto
resettheconsumption.
13Operation190TEN-1027-F1404