© Munters AB, 2018 12
3.6 Variables
RFS-6 Broiler variables, a brief description and default values are listed below.
1 Mixing Cycles 1-10 1
Number of mixtures for a two auger-unit
2 Maximum Portion 1…60 [Kg / Lb] 25
Maximum weight for one portion, for a manual scale
3 Max Auger Time 0…60 [minutes] 5
Waiting time before the alarm starts in case auger 1, 2 have not
been filled with portion (Alarm Code 5 or 4).
4 Not Empty Time 0…1440 [minutes] 3
Waiting time before the alarm starts in case the auger is not
empty and still contains more than half a portion (Alarm 6).
5 Low Limit 1: 0…65000 [Kg / Lb] 0
If the remaining quantity of feed in Silo 1 is below the low limit,
Alarm 7 is triggered.
6 Low Limit 2: 0…65000 [Kg / Lb] 0
If the remaining quantity of feed in Silo 2 is below the low limit,
Alarm 8 is triggered.
7 Feed / Pulse W Ratio 0…100 [Kg / Lb] 10
Relation between the feed quantity and the number of pulses at
the exit feed / pulse 1.
8 Water / Pulse Ratio 0…100 0.000
Relation between the water quantity and the number of pulses at
the entry water / pulse.
9 Reference [Kg / Lb] 0.000
Weight to which measurements are compared, to check that they
are within the desired range.
10 % Below 10…45 [%] 30
Measurements in %, within the range below the reference weight.
To Next Page
Loading...
Need help?
General
