Muratec MFX-3510 - Specifying the Document Size

1
2
Advanced copy functions 2-11
Advanced copy functions
Specifying the document size
Dark shadows are created around copy when you copy the document with the platen
cover open or when you copy books and magazines. These shadows can be erased.
1
Load the document.
2
Press the mode change key to change to copy mode.
3
Press <Advanced>.
4
Select “Document Size”, and press [Enter].
5
Select the size of the document to scan, and press [Enter].
6
If the paper size same to the selected document size is not loaded into the
machine, select the cassette or the bypass tray and specify the paper to use.
•For details, see “Selecting the paper to copy” (page 1-4).
•When the document size and the set paper match, this step is not required.
7
Press <Start>.
NOTE
When you load letter size document and legal size document together on the
automatic document feeder, you can copy them to paper of the appropriate size. Load
the document on the automatic document feeder, set both paper size to the machine,
and select “Auto” for the document size.