Copy operations4-2
Copy operations
Basic copy operation
This section contains information on the general operation for copying.
1 Press [Copy] or press the [Copy] key to display the initial Copy screen.
2 Place the document in the ADF or on the original glass.
3 Specify the desired copy settings.
– For details, refer to chapter 7, "Performing Copy mode operations", of the [Printer/Copier/Scanner
User's Guide].
4 Type in the desired number of copies.
– To change the number of copies, press the [C] (clear) key, and then type in the desired number.
To Next Page
Loading...
