Copy operations 4-3
5 To make a color copy, press the [Start (Color)] key.
To make a black-and-white copy, press the [Start (B&W)] key.
" This machine cannot automatically detect the size of an original document that will be scanned. Before
scanning the document, specify its size. If the size of the original document is not correctly specified, some
parts of the image may be lost.
When sorting or making double-sided or combined copies using the original glass, press [Finish] after all
pages of the document have been scanned.
To scan multiple document pages using the original glass, press [Separate Scan]. After scanning the first
page of the document, load the second page, and then press the [Start] key again. Repeat this process until
all the pages have been scanned. After the last page has been scanned, press [Finish].
To stop scanning or printing, press the [Stop] key.
To interrupt the copy job, press the [Interrupt] key.
To scan the next document while printing (reserve a copy job), position the next document, and then press
the [Start] key.
" For details, refer to chapter 7, "Performing Copy mode operations", of the [Printer/Copier/Scanner User's
Guide].
Zoom
Specify the enlargement or reduction ratio.
The copy is automatically enlarged or reduced to the size specified here when it differs from the Original Size set-
ting and [Zoom] is set to [Auto].
" For details, refer to chapter 7, "Performing Copy mode operations", of the [Printer/Copier/Scanner User's
Guide].
Duplex
Both the document and the copy can be specified as single-sided or double-sided.
" For details, refer to chapter 7, "Performing Copy mode operations", of the [Printer/Copier/Scanner User's
Guide].
Reduce Enlarge
Original
To Next Page
Loading...
Need help?
General
