Muratec MFX-C3680 - Printing the Fax Setting List

Muratec MFX-C3680 Series
Fax Features
37
Printing the Fax Setting List
PRE-REQUISITES
• FK-511 Fax Kit must be installed.
APPLICATION
Customer needs a record of the Fax Setting List for future
reference. They want a proof source should someone
change settings or should an additional engine be placed within the organization and
the customer wants to ensure that the subsequent MFP has the same fax settings.
1. Touch Utility.
2. Touch Administrator Settings.
3. Enter Password (Default is 1234567812345678).
4. Touch OK.
5. Touch Fax Settings.
6. Touch Job Setting List.
7. Select the Paper Tray from which you wish to pull the paper to output
the Fax Setting List.
8. Select Simplex or Duplex based on your needs (we recommend duplex
outputto promote environmental friendliness.
9. Press Start.
Fax Setting List contains Initial Panel Settings, Header/Footer Information,
Line Parameter Settings, TX/RX Settings, Report Settings, PBX Connection
Settings, Function ON/OFF Settings, Forward TXC Setting, Dial-In Settings,
Remote RX Settings, Memory RX Setting, Closed Network RX Setting, PC-Fax
FX Setting, Incomplete TX Hold Setting, TSI User Box Setting, PC-Fax
Permission Setting, Multi-Line Settings (only if a 2
nd
fax board is installed)
and Fax Print Quality Settings.
Ifnot on the home screen,
touch the Menu key on
the Control Panel .