Section 78 00-02-0732
2016-02-26 - 20 -
User Settings
User Settings provides options to specify viewing preferences for the PV450 Display. Pressing
yellow Up and Down arrows navigates through the options. To change an option, press the
corresponding soft key button next to the desired soft key command.
Ambient Light
Night and Day options are provided for ambient lighting. The screens below illustrate these
options. When the ambient lighting settings are changed in User Settings, the power-on
default is changed.
NOTE: The ambient lighting option is also accessible through soft key
commands on the gauge display screens. When selected, the Day/Night soft key
toggles the display to the opposite mode.
To Next Page
Loading...
Need help?
General