VJ-1324 OPERATION MANUAL 3 Before using
3-17
• "Busy-Washing" is displayed on the operation panel and the printer starts head cleaning.
• When head cleaning is complete, "Wash retry? No" is displayed on the operation panel.
NOTE
Do not remove only cleaning fluid pack while high capacity pack adapter is installed on the
printer. The information of the remaining smart chip card will be rewritten and the cleaning fluid
pack will not be usable.
7. Press the [Enter] key on the operation panel.
• "Insert InkCartridges" is displayed on the operation panel.
8. Remove the cleaning fluid pack and smart chip card from the high capacity pack adapter.
NOTE
• When there is remaining cleaning fluid pack and smart chip card, clarify the corresponding
pack and card, and store it as a set.
9. Install the ink pack and smart chip card to high capacity pack adapter.
10. Shake the high capacity pack adapter gently two to three times and insert it to the slot.
NOTE
• Do not insert the high capacity pack adapter into the ink cartridge slot without a cleaning fluid
pack attached.
The information of the remaining amount will be overwritten and the cleaning fluid pack will
not be usable.
• Insert the high capacity pack adapter all the way to the end of the slot.
To Next Page
Loading...
