MW BETA Series - Remote Controller Battery Replacement

13 / 21
BETA series
Model:
BETA 12K WIFI
BETA-user manual-EN-
R1 27.07.2020
Obrázek n ejde zobrazit.
Obrázek n ejde zobrazit.
Obrázek n ejde zobrazit.
HEAT TIMER, DISPLAY, HEALTH, SLEEP, I FEEL, 8°CH
ON/OFF MODE FUNCTION
OFF
AUTO CLEAN, TIMER, DISPLAY, HEALTH, I FEEL, 8°CH
COOL CLEAN, TIMER, DISPLAY, HEALTH, SLEEP, MIDLEW, I FEEL, 8°CH
DRY CLEAN, TIMER, DISPLAY, HEALTH, MIDLEW, I FEEL, 8°CH
FAN CLEAN, TIMER, DISPLAY, HEALTH, I FEEL, 8°CH
HEAT CLEAN, TIMER, DISPLAY, HEALTH, SLEEP, I FEEL, 8°CH
NOTE
You will hear a beep when you press the following buttons or select the following optional functions, though the actual model
haven't this function, we express our apologies:
▪ HEALTH (Optional Function: generate the ionizer)
▪ (button: SWING left/right)
▪ 8°CH (Optional function: 8°C heating)
7.2. R EPLACEMENT OF BATTERIES
Remove the battery cover plate from the rear of the remote controller,
by sliding it in the direction of the arrow. Install the battteries according
the direction (+ and -) shown on the remote controller.
• Use 3 AAA (1.5V) batteries. Do not use rechargeable batteries.
Replace the old batteries with new ones of the same type
when the display is no longer legible.
• When you open the battery cover, you can see DIP switch on
the cover back.
NOTE
▪ Child-lock: Press and together to active.
▪ Display ON/OFF: long press ECO button.