MW BETA Series - Device Functions; Air Flow Control (SWING); Cooling Mode Operation

15 / 21
BETA series
Model:
BETA 12K WIFI
BETA-user manual-EN-
R1 27.07.2020
Obrázek n ejde
zobrazit.
Obrázek n ejde
zobrazit.
Obrá
zek
nejde
zob
Obrá
zek
nejde
zob
Obrázek n ejde zobrazit.
Obrázek n ejde zobrazit.
Obrázek n ejde
zobrazit.
Obrázek
nejde
zobrazit.
8.1. "SWING" C ONTROL OF THE AIR FLOW
The air outlet flow is uniformly distributed in the room.
It is possible to position the direction of the air in the optimal.
The key activates the FLAP, the air flow is directed alternatively
from up to down. In order to guarantee an even diffusion of the air
in the room.
The key activates the motorized deflectors the air flow is
directed alternatively from left to right.
• In cooling mode, orient the flaps in horizontal direction.
• In heating mode, orient the flaps downward as the warm
air tends to rise.
The deflectors are positioned manually and placed under the flaps.
They allow to direct the air flow rightward or leftward.
• Never position FLAPS manually, the delicate mechanism
might seriously damaged!
• Never poke fingers, sticks or ther objects in the air inlet
or outlet vents. Such accidental contact with live pants
might cause unforeseeable damage or hurt.
8.2. C OOLING M ODE
The cooling function allows the air conditioner to cool the room and
at the same time reduces air humidity.
•
To activate the cooling function COOL, press the (MODE)
button until the symbol COOL appears on the display.
The cooling function is activated by setting the button or at a
temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust the
temperature (1), the speed (2) and the direction of the air flow (3),
by pressing the button indicated.
Obrázek n ejde zobrazit.