MWE LAB EMPEROR XT - ADJUSTING THE ARMRESTS

MWE LAB – EMPEROR XT USER MANUAL - January 2017v1
USER MANUAL - EMPEROR XT
12
9.1
Unghten right armrest screws, a few turns, to allow the metal plate to slide outward
freely without scratching the surface.
9.2
Repeat step 9.1 with the le armrest.
9.3
Push gently armrests outward.
Do not removes screws.
9.4
Align armrests as shown below.
9.5
Tighten strongly armrests screws in place on both sides.
9 ADJUSTING THE ARMRESTS
3/16”
3/16”