MWE LAB EMPEROR XT - MOVING THE EMPEROR

MWE LAB – EMPEROR XT USER MANUAL - January 2017v1
EMPEROR XT - USER MANUAL
7
5 MOVING THE EMPEROR
5.1
Remove wood pieces on each side of the Emperor.
5.2
From both sides (green dots), li, pull out and place the Emperor Workstaon, on a level
surface, directly on the oor at least two feet (61cm) from any wall, replace, refrigerator,
oven or other electric appliances. Do not place the Emperor workstaon on a stand.
Do not use these parts to move the Emperor, you will damage the Emperor.
At least 3 persons are required to move the Emperor. Cauon, the Emperor is heavy!
While moving the Emperor, always keep the Emperor at level to prevent the upper
secon to move.
You may use these parts to move the Emperor.