Nacra 500 MK2 - Trapeze Wires Steel

44.
6.2. Trapeze wires steel
Tools needed:
- Long nose plier
- Self amalgamating tape
1. Use the shackle 6mm 1/4, 2x nylon washers and the
trapeze ropes or wires.
2. Put the shackle through the center hole.
3. Install trapeze wires on each side.
• Tighten the shackle rmly with the long
nose plier!
4. Tape the shackle with self amalgamating tape.
2x
6mm 1/4
2x