79.
10.4. Raising the mainsail
1. Roll the mainsail from bottom to top.
The knot must be on the mast side. It can happen
that the system works better with the knot on the
other side.
2. Attach the mainhalyard ring to the sail.
3. Guide the mainsail into the slot of the mast.
4. Hoist the mainsail with the mainhalyard.
5. Hoist the mainsail until you reach the masthook.
6. Gently pull down to hook the mainhalyard ring into the
masthook.
7. Slide the bottom part of the lu downwards into the
masttrack.
To Next Page
Loading...
